Finding the Pilot Light on a Goodman Furnace: 1 Minute to Locate Your Furnace's Pilot Light Easily

Locating the pilot light on a Goodman furnace is crucial for troubleshooting ignition issues or relighting the burner. Most modern Goodman furnaces use an electronic ignition system rather than a traditional standing pilot light. However, older models may still have a manual pilot light. To find the pilot light, start by turning off the furnace and waiting for it to cool. Open the front panel to access the burner compartment. Look for a small metal tube connected to the gas valve—this tube leads to the pilot assembly. The pilot light will usually be near the main burners, positioned to ignite them when the system starts. If your furnace uses electronic ignition, you will find a small spark igniter or hot surface igniter instead of a classic pilot flame.

Tips 1:

As a designer, I appreciate the thoughtful layout in modern furnaces, which sometimes hides components for a cleaner look but can make access tricky. If you're planning a utility space or furnace room, keep accessibility in mind. Using a home designer tool can help you visualize these functional areas, ensuring maintenance panels are easy to reach without compromising the aesthetics.

FAQ

Q: Where is the pilot light typically located on a Goodman furnace?

A: It's usually found near the main burners inside the burner compartment, connected to a small metal tube running from the gas valve.

Q: Do all Goodman furnaces have pilot lights?

A: No, most newer Goodman models use electronic ignition and do not have a standing pilot light.

Q: How can I tell if my Goodman furnace uses electronic ignition instead of a pilot light?

A: If you see a spark igniter or a ceramic hot surface plate instead of a flame, your furnace has electronic ignition.

Q: Is it safe to relight the pilot light myself?

A: Only if you follow manufacturer instructions carefully. When uncertain, call a certified HVAC technician.

Q: How does furnace design affect pilot light accessibility?

A: Modern furnace design often conceals components for safety and aesthetics, so check for hinged or removable panels for maintenance access.