How to Reset Maintenance Light on Scion TC: 1 Minute to Clear Your Maintenance Light

The maintenance light on your Scion TC is a standard reminder for scheduled service, such as oil changes, rather than indicating a malfunction. Resetting this light is straightforward and requires no special tools. Here’s a step-by-step guide:

1. Turn the ignition key to the “OFF” position (make sure the engine is off).
2. Press and hold the trip meter reset button (located on the instrument panel).
3. While holding the button, turn the ignition key to the “ON” position—but DO NOT start the engine.
4. Continue pressing the trip meter button. The maintenance light will blink and then go out after a few seconds.
5. Release the trip meter reset button. The maintenance light should be reset and turned off.

It’s essential that you perform scheduled maintenance even if the light has been reset. Routine oil changes and checks prolong the life and efficiency of your Scion TC.

Tips 1:

As a designer, I always appreciate spaces—physical or digital—that embody clarity and order. If you’re tracking your car’s maintenance history, consider creating a simple, visually organized logbook or a dedicated section in your home office for vehicle paperwork. Incorporating user-friendly layouts, much like with home office layouts, will keep your records accessible and stress-free.

FAQ

Q: Why does my Scion TC maintenance light come on?

A: The maintenance light signals that your vehicle is due for routine service, such as an oil change, based on mileage intervals set by the manufacturer.

Q: Does resetting the maintenance light fix any mechanical issues?

A: No. Resetting the light only clears the reminder; actual maintenance still needs to be performed.

Q: How often should I perform maintenance on my Scion TC?

A: Refer to your owner’s manual. Typically, oil changes are suggested every 5,000 miles, but specifics may vary by model year.

Q: Will disconnecting the battery reset the maintenance light?

A: Not necessarily. The correct procedure involves using the trip reset button as described above.

Q: Can a mechanic reset my maintenance light for me?

A: Yes, any qualified mechanic can reset the light during routine service if needed.