How to Reset Your PUR Water Filter Light: 1 Minute to a Clear Water Indicator Reset

Resetting the light indicator on your PUR water filter is essential to ensure you always have fresh, filtered water. The filter light serves as a reminder to change your cartridge, and resetting the indicator after replacement allows the filter to track usage accurately. Here's how to reset your PUR water filter light for faucet-mounted and pitcher systems:

For PUR Faucet Mount Filters:

1. After installing the new filter, press and hold the reset button located on the end of the filter unit for about 5 seconds. This will reset the light.
2. If your model has an LED light, it should blink green, signaling the reset was successful.
3. Make sure to flush the filter with cold water for about 5 minutes before regular use.

For PUR Pitcher Filters:

1. Remove the lid and take out the used filter.
2. Install the replacement filter, ensuring it fits snugly.
3. Locate the reset button on the lid (often near the spout), then press and hold until you see the light flash.
4. If successful, the light should turn green. If not, repeat the process.

As a designer, I always tell my clients storing a water pitcher in the fridge or on the countertop can seamlessly blend into a modern kitchen if you consider both form and function. Proper placement—not only ensures convenience but also keeps your kitchen's style cohesive. That’s why efficient organization and layout matter. If you're ever refreshing your kitchen or need help optimizing utility areas, exploring advanced tools like a Kitchen Layout Planner can help you visualize the best spots for appliances, including your filter pitcher, making the space both stylish and practical.

Tips 1:

Always consult your PUR filter’s specific manual, as button locations and reset procedures may slightly vary between models. Regularly changing your filter and resetting the light indicator helps maintain water quality and ensures the filter’s life is tracked correctly.

FAQ

Q: How often should I change my PUR water filter?

A: Most PUR filters recommend replacement every 2-3 months or after filtering 100 gallons, depending on usage.

Q: What does each light color on my PUR filter mean?

A: Typically, green means the filter is good, yellow signals nearing replacement, and red indicates it’s time to change the filter.

Q: Why won't my PUR filter light reset?

A: Ensure you’re holding the reset button long enough and that batteries (if any) are functioning. Try again per manufacturer instructions.

Q: Can I use hot water in my PUR filter?

A: No, only use cold water. Hot water can damage the filter and affect performance.

Q: Is it safe to drink unfiltered water if the PUR filter light is red?

A: It's best not to. Replace the filter promptly for optimal water safety and taste.