# kitchen-closet-generate-stove-and-chimney-hood

> Easily install stoves and chimney hoods in your kitchen design with our step-by-step guide. Modify style, alignment, and size. Start designing now!

- **URL**: https://www.coohom.com/helpcenter/kitchen-closet-generate-stove-and-chimney-hood
- **Locale**: en_US
- **Updated**: 2026-06-11

## Content

Use the stove generation tool to install the stove and chimney hood on the corresponding cabinets.

For Users
=========

**All users** .If some enterprise accounts do not have the kitchen \& closet design entrance, please contact the CSC to apply.

Entrance
========

Enter the kitchen \& closet design and choose the **kitchen**.

**Entrance One:** Select the **Generate-Stove** from the top toolbar.

![](//qhstatic-sg-s3.coohom.com/image/png/1742281400145/A8CEBABD0663ECBAEEE7516DF7A7D2B5.png)

**Entrance Two:** Select the cabinet, and select **Generate-Stove** in the floating toolbar.

![](//qhstatic-sg-s3.coohom.com/image/png/1742281433454/A8CEBABD0663ECBAEEE7516DF7A7D2B5.png)

Generate Stove
==============

1. After entering the generate stove interface, select the cabinet that needs to be generated. In the basic parameters on the right panel, select add **Stove Style and Chimney Hood Style**.

![](//qhstatic-sg-s3.coohom.com/image/png/1742281607514/A8CEBABD0663ECBAEEE7516DF7A7D2B5.png)

2. After selecting the appropriate style, determine the**Installation Type** **and** **Alignment** , modify the stove margin at the **Spacing Mode** , and then click **Generate**.

**Note: If the Generate button turns gray, you need to check whether the cabinet that needs to be generated is selected!**

![](//qhstatic-sg-s3.coohom.com/image/png/1742281669560/A8CEBABD0663ECBAEEE7516DF7A7D2B5.png)

3. After generating the stove and chimney hood, click **Finish** to exit the generate stove interface.

![](//qhstatic-sg-s3.coohom.com/image/png/1742281718899/A8CEBABD0663ECBAEEE7516DF7A7D2B5.png)

Q\&A
====

**Q：**How to modify the stove size?

**A：** Exit the generation environment and click to select the **stove** to modify the **size and position** of the stove in the parameter panel.

![](//qhstatic-sg-s3.coohom.com/image/png/1742281770910/A8CEBABD0663ECBAEEE7516DF7A7D2B5.png)

<br />