How to Reset Oil Light on Acura TL: 1 Minute to Easily Reset Your Acura TL Oil Light

Resetting the oil light on an Acura TL is a straightforward process that you can complete in just a few minutes, and it doesn't require any special tools. Properly resetting this light after an oil change helps track your vehicle’s maintenance schedule accurately. Here’s a step-by-step guide for most Acura TL models (especially 2004–2014):

1. Turn the ignition key to the "ON" position, but do not start the engine.
2. Locate and press the "SELECT/RESET" button on the instrument panel (it may be a knob or button on the dashboard or next to the odometer display).
3. Keep holding the "SELECT/RESET" button.
4. While holding, turn the ignition switch to the "OFF" position, then back to "ON". Continue holding the button for about 10 seconds.
5. The maintenance required indicator and oil life indicator should begin to blink. Once the oil life indicator resets to 100% or the maintenance message disappears, you can release the button.
6. Turn off the ignition. Double-check that the oil light is reset by turning the car back on and viewing the dashboard.

If you have a push-button start or a newer model or if these steps do not work, check your owner’s manual for model-specific instructions, as different years might have specific sequences or employ on-screen menus.

Thinking like a designer, it’s similar to maintaining a well-structured floor plan: regular “resets” or updates keep the overall system organized and efficient. Attention to these details not only extends the car’s lifespan but also improves your experience as a driver. In fact, just as modern 3D Floor Planner tools let you visualize and track every design layer, vehicle systems with maintenance reminders are essential for visualizing your car’s long-term health.

Tips 1:

Always reset the oil light immediately after an oil change. If you accidentally reset it without changing the oil, make a note of your next service interval to stay on track with maintenance.

FAQ

Q: Why won’t my Acura TL oil light reset?

A: Double-check that you’re following the correct procedure for your year/model. If the light stays on, there may be a sensor issue or the process may be slightly different. Consult your owner’s manual or a mechanic if needed.

Q: How often should I change the oil in my Acura TL?

A: Typically, it’s recommended every 5,000–7,500 miles, but always follow the manufacturer's instructions or your car’s maintenance minder.

Q: Is it safe to drive with the oil light on?

A: No. An illuminated oil light may indicate low oil level or pressure, which can damage your engine. Check your oil level as soon as possible.

Q: Do I need any tools to reset the oil light?

A: No special tools are required—just your car keys and possibly your fingers to hold the buttons!

Q: Will resetting the oil light fix engine problems?

A: No. Resetting the light only clears the reminder. If your vehicle has mechanical issues, address them promptly with proper servicing.