Floor Plan Basic
Increase Free trial model permissions for users in Saudi Arabia, Romania, Malaysia, and Spain.
Free trial mode users' trial rights will be adjusted: when the user registered a Freetrial account, they will have the Pro account rights for 14 days. If the user does not pay after the expiration, the account will be automatically downgraded and the SD, HD, and UHD rendering coupons will be eliminated, it will still retain the previously rendered content.
Tips:
13 countries are supporting Free trial mode now!
Spain, Malaysia, Romania, Saudi Arabia， Italy, Canada, United Arab Emirates, Singapore, Portugal, Greece, Poland, United Kingdom, France
【Manufacture Catalog】Fixed an issue that the Advanced tool of individual users would display two Brand Catalogs, which are the Brand Area (Kujiale) and Manufacture Catalog (Coohom)
Function Introduction
When the user selects the scope of the elevation, the content of the unwanted room will be filtered out if it is included in the selection area.
Aming User：
All Coohom users
Specific Operation：
Select the range of elevation.
Filter out the constructions of rooms not within the section line, and only display the required content. (The content inside the room that is selected behind will not be displayed.)
When downloading as CAD, the content of unwanted rooms will also be filtered out.
Before the update, the showerhead behind the living room could be selected, although it was not visible
After the update, the showerhead is being filtered out
Function Introduction:
In the construction drawing tool, users can choose to replace the selected texture fill from the system library.
Specific Operation:
Select View Interface - Modify - Fill Replace
Select the paving surface that needs to be replaced, and choose the material to be replaced in the filling material library on the right side
The display of the replacement filling effect is shown in the following figure, which successfully shows the selected filling.
Tips：
Filling replacement supports restoring to default.
Currently, only hard decoration categories are supported
Currently, modification of filling color, scale, line type, and uploading custom fills are not supported.
In the Custom Order backend management list, we support the ability to view the operation records of custom audit orders and custom production orders. Users can check the flow of key events and time information of orders by viewing the operation records. We have made corresponding supplements to the operation records of customer orders, and also support viewing records of associated design schemes.
For part of Enterprise customers
Enter the enterprise background → custom order → my customer order, select any customer order, click "More", and choose 【Operation Record】.
2. You can find all the operation records of customer orders, including the content of the operation, the time of the operation, and the operator. In addition, the Design ID will be marked in Remarks.
Custom orders provide the ability for merchants to configure custom fields for order review, and some custom fields may be used by merchants for system docking and feedback writing. If the value of a field that is written back is modified when resubmitted, it may cause data errors. Therefore, this update adds a configuration item that allows custom fields to be configured to not allow manual modification when resubmitted.
For part of Enterprise customers.
Enter the custom order management background → order settings → custom information, click "Edit" or "Edit Field", and you can find a new configuration item 【Allow Modification】.
2. Configuring it as 【No】 means not allowing modification. In the tool, when resubmitting, the field will be grayed out and cannot be manually modified.
Panorama display more smooth
Supports 12k display room showcase on lower versions of iOS and Android
Introduction
Grouping materials, styles, appliances, and other items for display easily for users to visualize and select target content for replacement, significantly improving the user experience!
Specific Operation
Classify and manage replacement items on the left side
When there are more than 9 replacement items, users can click 'More' to expand or 'Hide' to collapse the display of replacement items."
When selecting replacement products for different items, there may be issues with size discrepancies or wrong orientations. Without seeing specific product dimensions, placement, and replacement effects, the final product may not match the user's expectations, resulting in poor display quality.
Therefore, the editor can help customers preview and adjust the effect and position of replacement items in advance, achieving accurate matching of replacement items.
After setting the anchor, click the ‘Adjust Location’ in the upper right corner to enter the editor
The left side allows the customer to select every replacement item , with the ability to adjust the position of the product.
【Enterprise Catalog】Supports viewing the creator of uploaded models.
When there are a large number of self-built models in the user's background and designers are able to upload completed models at any time using their own accounts, it can be difficult to find the designer responsible for a problematic model. Therefore, this feature will help the enterprise identify relevant personnel as quickly as possible and promptly handle any issues.
Enter the Enterprise Catalog, select a specific product within a category, go to the product details page, and check on 'Creator'
Entry
【Enterprise Catalog】Supports filling in the product SKU in the Enterprise Catalog background
This function allows users to fill in the product SKU directly after uploading a model, making it easier for them to manage products efficiently.
After uploading the model, users can directly fill in the SKU (up to 100 characters) for the product under its details.
【Inspiration Spaces】Supports multi-level replacement of products with separate materials.
This feature allows users to achieve replacement effects with different positions and materials on the same panel, enabling the Inspiration Spaces to achieve more refined display results!
Step 1: Select 'Cabinet' in the Custom Products category and turn on the switch
Step 2: In 'Create Group - Choose Type,' you can see two grouping types: [Select by Product] and [Select by Material]."
【Select by Product】orignal way
【Select by material】new function，Filter out all models, select the desired modes, filter out all materials belonging to the selected model(s), remove duplicate materials and display each unique material only once, allow the user to select one or multiple materials to create a group.
Under the 【Select by material】model，the group created by selecting multiple materials can only have its materials replaced.
Tips： If a model has been selected for material replacement, it cannot be added to another group.
【3D Viewer】Support manual setting of double-sided rendering for materials.
Add the 'double-sided drawing' feature to solve the issue of double-sided transparent materials, which will prevent the backside from becoming fully transparent.
Open the 'double-sided drawing' toggle in the '3D Viewer' editor.
What went wrong?
This will change the display language on this website.
We use cookies and similar tools to bring you a smooth and convenient experience on our site. To learn more about how we use cookies, view our Statement on Cookies here.
Along with User Agreement and Privacy Policy provided by Coohom Inc. and its affiliates (“we”, “us” or “Coohom Group”), this Notice provides you (or “user”) with information about the cookies that are used by the features and services of Coohom official website or Coohom Platform (“Coohom Platform”). This Notice will be reviewed from time to time to ensure that its content is kept up-to-date. If any changes are made, we will publish the latest version of the Notice here. When we make significant changes, we will notify you of the change the next time you visit Coohom Platform or by other means of communication.
When you visit Coohom Platform, the site asks your browser to store a small piece of data (text file) called a cookie on your device in order to evaluate the performance of the site. We also use third-party cookies, which are cookies from a domain different than the domain of Coohom Platform you are visiting, for marketing efforts.
We use the following categories of cookies:
Strictly necessary cookies are necessary for Coohom Platform to function and cannot be switched off in our systems. They are usually only set in response to actions made by you which amount to a request for services, such as setting your privacy preferences, logging in or filling in forms. You can set your browser to block or alert you about these cookies, but that will cause some parts of Coohom Platform to not work.
Performance cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site.They help us to know which pages are the most and least popular and see how visitors move around the site.If you do not allow these cookies we will not know when you have visited our site and will not be able to monitor its performance.
We also cooperate with third-parties that deploy cookies when users interact with marketing communications. Marketing cookies collect personal information such as your IP address and clicks. Collected information is used to evaluate the effectiveness of our marketing campaigns or to provide better targeting for marketing. We do not always have control over those cookies.
The "Cookie Settings" can be utilized to customize your cookie preferences. The "Cookie Settings" will record when you have consented to or rejected our Notice and will ask for consent once a year to ensure users stay up-to-date with changes to our Notice. All the performance cookies and marketing cookies are controlled by the "Cookie Settings". You can also access the “Cookie Settings” anytime from the link in the footer of Coohom Platform.
All of the cookies used on Coohom Platform, on third-party websites and through emails can be enabled or disabled through your browser. To control cookies through your browser, follow the instructions usually located within the “Help”, “Tools” or “Edit” menus in your browser. Please note that disabling a cookie or category of cookies does not delete the cookie from your browser unless manually completed through your browser function.
Your data collected from cookies can be deleted. If cookies are deleted, the information collected prior to the preference change may still be used. However, we will stop using the disabled cookie to collect any further information from your user experience. For marketing cookies, when a user opts out of tracking, a new cookie is placed to prevent users from being tracked.
You can set your browser to block strictly necessary cookies, but that will cause some parts of Coohom Platform to not work.
You can accept or refuse the use of performance cookies or marketing cookies at any time. If you choose to reject the use of performance cookies or marketing cookies, you will still be able to use Coohom Platform, and your use of all the features and areas of Coohom Platform will not be limited.
We may update this Notice from time to time or for other operational, legal or regulatory reasons to make changes in the cookies we use. Therefore, please re-read this Notice periodically to learn about our use of cookies and related technologies. The date at the top of this Notice indicates when it was last updated.
If you have any questions about our use of cookies, please feel free to contact us via email at support@coohom.com.
We will respond to your questions, comments or suggestions within 30 days after we receive them and verify your user identity.