5 Living Room TV Wall Ideas with Windows: Creative small-space solutions for TV walls that include windows — practical tips from a senior interior designer

I once had a client insist their TV be mounted exactly between two tall windows, and they wanted no curtains — I nearly cried, then learned a trick that now saves awkward layouts. Small setbacks like that taught me that a living room TV wall with windows can actually spark the most creative solutions.

1. Floating media console under the windows

I love a floating media console because it preserves sightlines and airiness. By mounting a slim console or shelf beneath the TV and between lower window sills, you keep the room feeling open and avoid bulky cabinetry that blocks light. The advantage is a clean modern look and easier cleaning; the little challenge is precise wall-anchoring and routing cables through the wall or using neat surface conduits.

save pin

2. Use window treatments for glare control

Rather than hiding windows, I recommend layered window treatments — sheer + blackout roller or motorized blinds — so the TV gets optimal contrast while the windows still frame the room. This balances natural light and screen visibility; just be prepared to budget a bit more for custom shading or motorization in wider bays.

save pin

3. Create a framed TV nook between windows

Framing the TV with a shallow recessed panel or painted surround turns the screen into a deliberate focal point without touching the windows. I’ve done this in several city apartments: paint the niche a deeper tone and install soft LED backlighting for reduced eye strain. The upside is a cohesive look; the small trade-off is you’ll need a stud-friendly mounting plan if the niche sits between studs or over insulation.

save pin

4. Build low cabinetry that doubles as a bench

When windows have low sills, low cabinetry that spans under the glass can double as storage and seating — perfect for reading corners or plants. I helped a family add a cushioned bench on top of hidden drawers; it became the favorite hangout. The benefit is maximizing function in a narrow wall, though remember to keep cabinet depth shallow enough to avoid blocking window operation.

save pin

5. Go vertical: tall flanking storage and wall-mounted TV

If the windows are narrow or high, mount the TV slightly off-center and add tall shelving or cabinets on one or both sides to balance the composition. This asymmetry feels intentional and gives you display or AV storage. It’s visually dynamic, but alignment and proportion need attention so the windows don’t look like afterthoughts.

save pin

Implementation tips and my real-case note

In one small flat I redesigned, the TV sat between two windows with only 90 cm of wall — I ran a slim power channel, used a low-profile console and installed dimmable shades with remote control. The client loved the light and the uncluttered look, though we did spend a weekend mounting and fine-tuning the blinds. If you want to test layouts quickly, a 3D plan helps you see sightlines and furniture fit before drilling holes.

save pin

Tips 1:

For quick layout mockups, I often rely on a room planner to check proportions and cable runs; it saves time and makes decisions less stressful. When working around windows, measure sill height, clearances for window operation, and natural glare angles during different times of day.

save pin

Tips 2:

Choose low-reflectance TV screens or enable anti-glare modes, and consider bias lighting behind the TV to improve perceived contrast without darkening the room. Also, prefer shallow cabinetry (20–30 cm) if you need storage under windows so seating and window access remain comfortable.

save pin

Tips 3:

When adding wiring, always locate studs and avoid routing through insulated pockets without proper sleeves; consult an electrician for recessed power or in-wall cable kits. Simple surface raceways can be painted to match the wall for a budget-friendly solution.

save pin

FAQ

Q: Can I mount a TV between two operable windows?

A: Yes — as long as you keep the TV and mount clear of window operation, allow space for handles, and avoid blocking ventilation. Measure swing or sliding paths before installing.

Q: How do I reduce glare on a TV wall with windows?

A: Use layered window treatments (sheer + blackout), anti-glare screens, and bias lighting behind the TV to improve visibility without darkening the whole room.

Q: Is it better to place the TV above a low console or flush-mounted in a niche?

A: Flush-mounted niches look cleaner and hide cables, while low consoles add storage and are easier for AV access — choose based on storage needs and wall depth.

Q: Will a TV between windows look unbalanced?

A: Not if you frame it intentionally — use paint, trim, flanking shelving, or lighting to create a cohesive focal point that reads as designed rather than accidental.

Q: How high should I mount the TV relative to window sills?

A: Aim for the TV center to be at eye level when seated (about 100–110 cm from floor), and ensure the bottom edge doesn’t interfere with sill-mounted radiators or seating.

Q: Any quick way to test layout before committing?

A: Yes — try a 3D floor planner to mock up proportions and sightlines so you can visualize TV placement and window interactions. (see case studies for reference)

Q: Are motorized blinds worth it for a TV wall with windows?

A: They’re very convenient for glare control and can be integrated with smart home systems; the downside is higher cost but great ease of use — especially for large or high windows.

Q: Where can I find guidelines on TV mounting heights and viewing distances?

A: The Society of Motion Picture and Television Engineers (SMPTE) and manufacturers provide viewing distance recommendations; consult their specs for screen size vs. distance to optimize comfort (SMPTE guidelines).

save pin