Disassembling a Kohler Kitchen Faucet Spray Head: A Step-by-Step Guide to Repair and Maintenance

Disassembling a Kohler kitchen faucet spray head can be essential for cleaning or replacing parts. Follow these steps to ensure a smooth process:

1. **Turn Off Water Supply**: Before starting, turn off the water supply to avoid any accidents. Locate the shut-off valves under the sink and turn them clockwise.

2. **Remove the Spray Head**: Gently twist the spray head counterclockwise to detach it from the hose. If it’s stuck, try using a rubber grip to provide extra traction.

3. **Access the Internal Components**: Once removed, look for a small retaining clip or screw that holds the spray head together. Use pliers or a screwdriver to remove it carefully.

4. **Separate the Components**: After removing the clip or screw, carefully pull apart the two halves of the spray head. Take note of the internal components, such as the rubber seals and the spray mechanism, as these may need cleaning or replacement.

5. **Clean or Replace Parts**: Use a soft brush or cloth to clean any mineral buildup inside the spray head. If any parts appear damaged, consider replacing them with genuine Kohler parts for optimal performance.

6. **Reassemble the Spray Head**: Once cleaned or repaired, reassemble the spray head in the reverse order, ensuring all components are securely in place.

7. **Reattach to Faucet**: Finally, twist the spray head back onto the hose, ensuring it’s tightly secured. Turn the water supply back on and test for leaks.