How to Reset Light on PUR Filter: 1 Minute to a Healthier Home with Clean Water

Resetting the indicator light on your PUR water filter is an essential maintenance step to ensure you accurately track your filter's lifespan. The process is quite straightforward, whether you have a PUR faucet filter or a pitcher/dispenser. Here’s how to do it:

For PUR Faucet Filters:

1. Remove the filter unit from your faucet and ensure it’s clean and free of water droplets.
2. Press and hold the “Reset” button (typically located on the side or bottom of the filter housing) for about 5–10 seconds. When held correctly, the indicator light should blink or change color, signaling a successful reset.
3. If the light does not immediately reset, check that the filter is installed correctly and try again.

For PUR Pitchers/Dispensers:

1. Press and hold the reset button (usually found on the lid) for at least 5 seconds.
2. The light will flash green, indicating that the filter timer has been reset.
3. If your model uses a sticker-type indicator, simply replace the sticker at the start of each filter change.

Always consult your specific PUR model’s user manual for precise instructions, as some models may vary slightly. Keeping track of your filter status not only ensures water quality but fits into an overall healthy and well-designed home environment. As a designer, I’ve seen firsthand how integrating user-friendly tools—like smart interior design solutions—streamlines daily routines and enhances the comfort and efficiency of any living space.

Tips 1:

Remember to change your PUR filter according to the manufacturer's recommended schedule (usually every 2–3 months or after filtering a set number of gallons). Resetting the light without an actual filter change may compromise water quality, so always pair the reset with maintenance. Also, be sure your hands are clean and dry during the process to prevent any malfunction.

FAQ

Q: Why won’t my PUR filter light reset?

A: Double-check the filter installation and ensure you’re holding the reset button long enough (at least 5–10 seconds). If issues persist, try removing and reinstalling the filter or refer to the product manual.

Q: Does resetting the light mean the filter is clean?

A: No. Resetting only recalibrates the timer. Change the filter as scheduled for effective filtration.

Q: What do the PUR filter lights mean?

A: Green means your filter is good, yellow signals it’s nearing time to change, and red alerts it’s time for a new filter.

Q: Do all PUR filters have a resettable light?

A: Most recent PUR filters do, but some older or basic models may use color-changing date stickers instead.

Q: Can I use the filter if the light stays red after a reset?

A: It’s best not to. A persistent red light likely means the filter needs replacing, or the system needs troubleshooting.