How to Reset the Light on Your PUR Filter: 1 Minute to Clear Instructions for Easy Resetting

If you’ve installed a PUR filter on your faucet or pitcher, you might encounter a situation where the filter indicator light stays red or doesn’t reset after you change the filter. This light is designed to help you keep track of the filter’s lifespan and water quality—but sometimes, resetting it is necessary. To reset the light on most PUR filters, start by locating the reset button, which is usually near the filter housing or directly beneath the cover. After replacing the filter cartridge, hold down the reset button for 3 to 5 seconds, or until the light flashes green. If the button isn’t visible, consult your model’s manual, as some models require you to detach and reattach the filter or twist it to a certain position. This quick process guarantees your filter’s tracking system returns to accurate mode so you can keep enjoying clean water.

Tips 1:

As a designer, I always recommend integrating small functional alerts—like PUR’s filter light—into the kitchen layout. It’s important that filter indicators are easy to see, without disrupting the aesthetic flow. For homeowners planning a kitchen remodel or upgrade, optimizing filter placement can be simple with a kitchen layout planner, ensuring the PUR filter is both accessible and visually harmonious with your space.

FAQ

Q: Why won’t the PUR filter light reset after changing the cartridge?

A: Make sure you held the reset button for at least 3 seconds and that the filter is installed correctly. If you still encounter issues, try removing and reinstalling the new cartridge.

Q: Is the PUR filter light always accurate?

A: The filter light tracks usage, but occasional resets may be needed. Always monitor water quality and change filters regularly.

Q: Where is the PUR filter reset button located?

A: It’s usually on the filter housing, beneath a small cover, or directly on top, depending on the model.

Q: Can I use my PUR filter if the indicator light isn’t working?

A: Yes, but you’ll need to track usage manually and change the filter every 2-3 months.

Q: Will resetting the PUR filter light affect filtration quality?

A: No—it only resets the counter. Filtration quality depends on cartridge installation and condition.