5 Bathroom Layouts for 79x114 Room: Smart, compact bathroom ideas for a 79 in × 114 in space from a pro designer

I once had a client who insisted their tiny bathroom needed a freestanding tub, a double vanity, and space for yoga — in a 79 in × 114 in room. I nearly laughed, then sketched a workable compromise and learned that small spaces force creativity. For a quick visual check, I often start with a visual room mockup to test layouts fast.

1. Linear layout along one wall

Place the vanity and toilet on one long wall and the shower at the far end. This keeps plumbing runs short, creates a clear traffic path, and makes the room feel longer. The trade-off is limited vanity width, so I recommend a wall-mounted sink and slim cabinet to keep counters usable.

save pin

2. Walk-in wet room with glass divider

A wet room with a frameless glass shower splash reads modern and opens sight lines, perfect for a 79 in × 114 in footprint. It’s budget-friendly if you reuse floor slopes and waterproofing, though you’ll need good ventilation and a properly sloped drain to avoid splashes.

save pin

3. Alcove tub-shower combo

If bathing is non-negotiable, an alcove tub at the short wall paired with a compact vanity opposite makes sense. You lose some floor openness, but gain a full tub; choose a shower-tub insert and a clear glass panel to keep things light. Before you build, I always suggest you measure and map your space with a simple tool to confirm clearances and door swings—this prevents surprises.

save pin

4. Corner shower + floating vanity

A neo-angle or quadrant corner shower frees up central square footage, letting you install a floating vanity and open shelving on the long wall. This layout gives a visual breathing room and easy cleaning under the vanity, though corner showers can be trickier to waterproof and may require custom glass.

save pin

5. Pocket door and vertical storage wall

Swap the swing door for a pocket door to reclaim elbow room near the entry, then run tall cabinets vertically for linens and toiletries. It’s a low-cost move with big impact — just confirm stud placement and rough-in space during planning. For final styling or to generate quick design options, I often pull sample layouts from curated bathroom layout inspirations.

save pin

Tips 1:

Fixtures: choose a 24–30 inch vanity, a 30–36 inch shower footprint, or a 60-inch tub as starting references for a 79×114 room. Lighting: layered light (overhead + task + mirror) makes compact bathrooms feel larger. Materials: large-format tiles with continuous grout lines visually expand the floor.

save pin

FAQ

Q1: Is a 79 in × 114 in room big enough for a tub? A: Yes — a standard alcove tub (60 in long) fits on the 79 in side with space left for fixtures; you’ll just need to plan the opposite wall for the vanity and toilet efficiently.

Q2: What door type works best? A: Pocket doors or outward-swinging doors save interior clearance. Sliding doors are great visually but require wall cavity or track considerations.

Q3: Minimum shower size recommendation? A: For comfort, aim for at least 30 in × 36 in for a standing shower; 32 in square is a tight minimum for usability.

Q4: How do I handle ventilation? A: Install an exhaust fan sized for the room (CFM based on square footage) and ideally wire it to run longer than a short timer to clear moisture.

Q5: Can I fit a washer-dryer stack? A: In some layouts you can tuck a stacked washer-dryer in a tall closet if plumbing and venting allow, but consider noise and moisture control.

Q6: What about accessibility? A: If you need accessibility, follow ADA guidelines for clearances and grab bar locations; the ADA Standards for Accessible Design provide the specific clearances and are a reliable reference.

Q7: How much will a modest remodel cost? A: Costs vary widely by region, but a basic refresh (fixtures, tile, paint) can be a few thousand dollars; full gut-renovations with layout changes run higher due to plumbing and electrical work.

Q8: Where can I quickly mock up layouts? A: Use an online layout creator to draft options, or consult a designer to translate your measurements into usable plans; many pros start with a simple floor plan tool before finalizing.

save pin