Fixing a Dripping Delta Kitchen Faucet A Step by Step Guide: Learn how to effectively repair your Delta kitchen faucet and eliminate leaks

A dripping Delta kitchen faucet can be a nuisance and lead to increased water bills. Fortunately, fixing it is often a straightforward task. Here’s a step-by-step guide to help you address the issue effectively.

First, ensure you have the necessary tools: a wrench, screwdrivers, and replacement parts such as O-rings or cartridge depending on your faucet model. Start by turning off the water supply to the faucet and covering the drain to avoid losing small parts.

Step 1: Remove the Faucet Handle

Use a screwdriver to take off the handle screw, typically located under a decorative cap. Once the screw is removed, gently pull the handle off to expose the inner components.

Step 2: Inspect the Cartridge or Valve

Check for damage in the cartridge or valve seat. A worn-out cartridge is a common cause of leaks. If it appears damaged, replace it with a new one that matches your faucet model.

Step 3: Replace O-Rings

If your faucet uses O-rings, inspect them for wear. O-rings can be found on the cartridge or at the base of the handle. Replace any worn O-rings with new ones to ensure a tight seal.

Step 4: Reassemble the Faucet

After replacing any damaged parts, carefully reassemble the faucet in reverse order. Ensure that all screws are tightened securely but avoid over-tightening, which can cause further damage.

Step 5: Test for Leaks

Turn the water supply back on and test the faucet for leaks. Run the faucet for a few minutes to ensure that the drip has stopped.