How to Change Brake Light of 2022 Hyundai Venue: 1 Minute to Quick Brake Light Replacement Guide

Changing the brake light on a 2022 Hyundai Venue is a straightforward process that can help improve both your road safety and the visual appeal of your vehicle. Before you start, make sure you have a replacement bulb (typically a 7440 or 7443, but double-check your manual) and a Phillips-head screwdriver. Here’s a step-by-step guide:

1. Turn Off the Vehicle: Ensure your Venue is parked with the engine off and keys removed for safety.
2. Open the Trunk: Lift the rear hatch to access the tail light assembly.
3. Remove the Light Cover: Look for screws or tabs on the side of the tail light panel from inside the trunk. Use the screwdriver to remove screws, if present.
4. Detach the Tail Light Assembly: Gently pull the tail light assembly away from the car body. It may require a wiggle, as clips often hold it in place.
5. Access the Brake Light Bulb: At the back of the detached assembly, locate the brake light socket. Twist it counterclockwise to release.
6. Replace the Bulb: Remove the faulty bulb and insert the new one. Make sure it seats properly.
7. Reassemble: Put the socket back in, twist to secure, and reattach the tail light assembly. Secure it with screws or clips as necessary.
8. Test Your Brake Light: Before closing the trunk, press the brake pedal (you may need a helper) to ensure the new bulb works.

As a designer, I also believe that even small details like functional lighting contribute to the overall aesthetic and safety of a vehicle. Just like a well-lit room, the right lighting upgrades on your car can make a significant difference—not only in appearance but in creating a sense of reliability and thoughtfulness in design.

Tips 1:

Use gloves or a clean cloth when handling the new bulb to avoid getting oils from your skin on the glass, which can reduce bulb life. Also, consider replacing both brake light bulbs at the same time for consistent brightness and convenience.

FAQ

Q: What type of bulb does a 2022 Hyundai Venue brake light use?

A: Typically, it uses a 7440 or 7443 bulb. Always confirm with your vehicle manual or the existing bulb for accuracy.

Q: Do I need any special tools to replace the brake light bulb?

A: In most cases, a Phillips-head screwdriver is enough, but some models may only use clips—check your tail light assembly for specifics.

Q: Can I replace the brake light bulb myself or should I see a mechanic?

A: This is a simple DIY task that most people can perform; however, if you’re uncomfortable, a mechanic can assist you quickly.

Q: Why is my new brake light still not working after replacement?

A: Double-check that the bulb is seated correctly and see if the fuse is blown or wiring is faulty.

Q: How often should brake light bulbs be checked or replaced?

A: Check lights during regular vehicle inspections, but replace bulbs immediately when burned out or if brightness is noticeably reduced.