How to remove moen kitchen faucet: A step-by-step guide to uninstalling your Moen kitchen faucetEvelyn BrightwoodJan 20, 2026Table of ContentsTips 1FAQFree Smart Home PlannerAI-Powered smart home design software 2025Home Design for FreeRemoving a Moen kitchen faucet might seem daunting at first, but with the right tools and a little patience, you can do it yourself! Follow these simple steps to safely and effectively uninstall your faucet. First, gather your tools. You will need an adjustable wrench, a basin wrench, a screwdriver, and a towel to catch any water that drips during the process. Once you have your tools ready, turn off the water supply to the faucet. Locate the shutoff valves under your sink and turn them clockwise until they are fully closed. Next, open the faucet to allow any remaining water to drain out. This will prevent a big mess when you disconnect the water lines. After draining the water, it's time to disconnect the supply lines from the faucet. Use your adjustable wrench to loosen the nuts that secure the water supply lines to the faucet's base. Be sure to have your towel handy to catch any water that may spill out. Once the supply lines are disconnected, locate the mounting nuts that hold the faucet in place. These are usually located underneath the sink, and you may need to use your basin wrench to reach them. Carefully turn the nuts counterclockwise until they are loose enough to remove by hand. After removing the mounting nuts, you should be able to lift the faucet out of the sink. If the faucet is stuck, gently wiggle it back and forth to loosen it. Finally, clean the area around the sink where the faucet was installed to prepare for your new faucet. Congratulations! You have successfully removed your Moen kitchen faucet and are ready for the next steps in your project.Tips 1:Always keep a towel nearby to catch any spills while you work. It can save you from a messy cleanup!FAQwelcome to CoohomHome Design for FreePlease check with customer service before testing new feature.