How to Reset Your KitchenAid Dishwasher When Clean Light is Flashing: A Fast-Track Guide to Troubleshooting Your Appliance

Is your KitchenAid dishwasher's clean light flashing? This can be confusing and may signal an underlying issue. Luckily, resetting the dishwasher is often the first step to troubleshoot the problem. Let’s dive into the process of resetting your KitchenAid dishwasher!

Understanding the Clean Light Flashing Issue

The flashing clean light on your KitchenAid dishwasher usually indicates that the cycle has not completed correctly. This can be due to various reasons, including a power surge, a clogged drain, or even a door that hasn’t closed properly. Before jumping into resetting it, take a moment to check for these common issues.

Steps to Reset Your KitchenAid Dishwasher

Follow these steps to reset your KitchenAid dishwasher and resolve the flashing clean light:

Step 1: Power Off the Dishwasher

First, unplug the dishwasher from the power source or turn off the circuit breaker connected to it. Wait for about 5 minutes to ensure that the system fully resets.

Step 2: Power On After Waiting

Once you’ve waited, plug the dishwasher back in or turn the circuit breaker back on. Listen for the typical sounds that confirm it has power.

Step 3: Activate the Diagnostic Mode

If the clean light continues to flash, try entering diagnostic mode. Depending on your model, press the 'High Temp' and 'Start' buttons simultaneously to enter this mode. Follow the prompts to allow the cycle to complete.

Step 4: Check for Error Codes

If you encounter error codes during diagnostic mode, refer to your user manual for specific instructions related to those codes.

When to Seek Professional Help

If resetting your KitchenAid dishwasher does not resolve the issue, it may be time to call a professional. Continuous flashing can indicate deeper problems, such as hardware malfunctions. Taking action early can prevent further damage to your appliance.

FAQ

Q: How can I check for clogs in my dishwasher?

A: Regularly inspect the filter and drain areas for debris to minimize clogs.

Q: Is there a reset button on my KitchenAid dishwasher?

A: Most KitchenAid dishwashers do not have a dedicated reset button; following the power-off method is generally recommended.

Q: What if the problem persists after resetting?

A: If the issue persists, reach out to a KitchenAid service center for professional assistance.