The countertop generation function allows efficient and flexible countertop design, which can be automatically identified or freely drawn.
Entrance
Select Kitchen＆Bath to enter the customization interface.
Entrance One: Select the Generate-Countertop from the top toolbar.
Entrance Two: Select the cabinet, and select Generate-Countertop in the floating toolbar.
Generate Countertop
1. Select the cabinet, the tool will automatically identify the cabinets that need to generate countertops. You can also press and hold shift to select multiple cabinets for generation. If you need to identify all cabinets, you can click Auto-select.
2. In the basic parameters on the right panel, select add front edge, back splash and countertop material. After adjusting the specific parameters, click Generate.
3. If you need to freely adjust the range of the countertop generation, click manual edit in the top bar to enter the manual mode.
4. In the manual interface, use the drawing tools on the top bar in 2D to edit edge and add rectangle.
5. You can manually edit points, lines, and surfaces, or enter values for precise adjustments. After the adjustments are completed, click Generate.
6. After generating the countertop, click Finish to exit the generate countertop interface.
- The generate countertop effect is as follows：
