helpcenter-coohom

[Enterprise] AI Kitchen Automatic Layout: Custom Product Template Configuration Instructions

Reading time of this article:0 minuteUpdated 2026-05-18

Want your AI to directly use cabinet materials from the enterprise catalog and generate a perfect kitchen design plan with just one click? Simply complete a few steps to configure the products and templates, and your product library will instantly transform into an intelligent designer, allowing you to enjoy the magical experience of fast rendering and precise execution effortlessly!

For Users

Enterprise users with relevant permissions. If you have any needs, please contact CSC for consultation.

The sub-account needs the main account to configure the role permissions of the AI Kitchen Auto Layout Designer in the Employee Management of the workspace, and it can be used normally after the configuration is completed.

Entrance

On the Workspace page, click on the left sidebar Enterprise Catalog—Custom Products—AI Kitchen Auto-layout.

Custom Product Config

1. EnterAI Kitchen Auto-layout, clickCustom Product Config, and select the category that needs configuration at the top.

2. Under the category to be configured, clickAdd Config, then clickMore Actions. You can Rename as needed.

If the configuration is not needed, you can directly click Delete.

3. ClickType, select the required type of cabinet, then click Add Product, select the required materials from the pop-up panel, and click Confirm.

4. Click Add Type in the upper right corner, and add products using the same method.

Add as many types as possible for better output results.
When selecting a type, each cabinet category can only be chosen once.
When choosing a category, select one category model cabinet from the enterprise library for each category (a category refers to one style, e.g., basic full-door cabinets. Do not select multiple styles of full-door cabinets. AI will choose cabinets according to the selected category, and mixed styles will greatly affect the output results).

5. After adding the products, the products will be placed in the list below. At this point, there are different configuration methods for various library-building approaches.

Example 1: I am a standardized cabinet enterprise; my cabinets are built individually, and there are many for one style, differing only in size (commonly used in North America). Configuration is as follows:
- Select all cabinets of desired sizes under the desired category here.
- Since each cabinet currently has a fixed size, there's no need to enable ScalE.

Example 2: I am a custom cabinet enterprise; I can produce any cabinet, and AI can randomly generate cabinet widths within my processing range (suitable for most companies). Configuration is as follows:
- First, select corresponding models within the enterprise catalog.
- Enable Scale. If you hover over the info icon behind it, you'll see the width range for the cabinet set in the parametric editor.
- Simply enable Scale, meaning the current cabinet's width range corresponds to the parametric editor's range, allowing AI to generate values within it.

Example 3: I am a custom cabinet enterprise; although my cabinets are custom-made, I have certain cabinet width preferences (suitable for most companies). Configuration is as follows:
- After enabling Scale, users can input the desired width value in the text box behind it (note: this width value supports manual input or dropdown selection, depending on user model configuration; if the model is configured as a numerical range, input any value within that range; if the model is configured as fixed options, select the corresponding option via dropdown).
- Width values must be within range and cannot exceed parameter limits.

6. After completing the configuration in various dimensions as described above, click Save below.

7. You can add multiple configurations to meet the needs of different models, defining them based on country, style, series, etc., as needed (once configured, custom product templates can be selected as needed).

Tips for configuring different categories are as follows:

Base cabinet	Try to configure every category
Wall cabinet	Try to configure every category
Tall cabinet	Try to configure every category
Island	When configuring base cabinets, you can configure multiple options. AI will randomly choose among them.
Corner Cabinet	Currently supports only blind corner; must be configured to avoid missing corners.
Refrigerator	Divided into standalone refrigerators, refrigerator tall cabinets, and refrigerator wall cabinets, only one product can be selected in a configuration. Standalone refrigerator - Select a 3D model of a refrigerator. Refrigerator tall cabinet - When the refrigerator model is already built into the parameterized cabinet, choose this. Refrigerator wall cabinet - Separate selection for the refrigerator 3D model and corresponding wall cabinet.
Sink	Divided into sink cabinet + sink model and sink cabinet and sink model, choose based on user modeling situation.
Hood	You can choose a hood model or hood cabinet. If selecting a 3D hood model, ensure its elevation is properly set; otherwise, it will generate on the floor.
Stove	Separated into integrated stove and stove cabinet + cooktop, choose accordingly.
Oven	Currently supports only oven tall cabinets; select a tall cabinet for configuration.
Decoration	Set areas for crown molding, toekick molding, countertops, etc.
Others	/

Configure Custom Product Templates

1. Once configuration is complete, switch to Custom Product Templates.

2. In the custom product template page, Add Template according to the configuration (up to 10 templates can be created). You can also Rename the templates.

All templates created here will appear in the tools, allowing users to switch as needed.

3. Within the template, the view is split into two sections: The left shows location example diagrams, and as categories are set in the right section, corresponding examples on the left will be highlighted.

When setting categories, all configurations made can be selected. Different templates may reuse the same configurations.

4. Once all settings are confirmed, you can set the template to Publicly Visible. Non-public templates will not be visible for tool use.

How templates are displayed in tools:

Categories	Names of cookies	Functions
Strictly necessary cookies	qunhe-jwt	Remember your login status: user id, name, email, avatar, character, region
	qunhe-refresh	Refresh your permissions: user id, name, email, avatar, character, region
	showroom-jwt	Remember your user id, email, company, and status
	qh-locale	Stores your language preferences
	qh-cm-fe-locale	Stores your language preferences
Performance cookies	ktrackerid	Monitors abnormal conditions during your visit
Performance cookies	ktrackertime	Monitors abnormal conditions during your visit
Marketing cookies	qhdi	Recognises website visitors(anonymously- no personal information is collected on the user)
	hubspotutk	Identifies your session
	rdt_uuid	Identifies which web page you came from
	hssrc	Identifies which web page you came from
	hstc	Identifies which web page you came from
	cio	Identifies which web page you came from
	cioid	Identifies which web page you came from
	fbd	Identifies which web page you came from
	ajs_anonymous_id	Identifies which web page you came from
	ajs_user_id	Identifies which web page you came from
	messagesUtk	Identifies which web page you came from