Untuk menghapus satu ruangan yang sudah dipilih atau area luar, klik tombol hapus.
Semua pengguna Coohom
Saat Anda menghapus ruangan yang dipilih, elemen perkerasan juga akan dihapus. Jika ada ruangan lain di sekitar ruangan yang dipilih, proses penghapusan mungkin gagal.
Sebelumnya, desainer mungkin ragu membagikan rendering atau gambar panorama kepada klien karena khawatir akan digunakan tanpa izin. Dengan panorama Coohom, Anda dapat mengatur masa berlaku untuk mengatasi hal tersebut. Setelah waktu yang ditentukan berakhir, klien tidak lagi dapat melihat gambar panorama. Fitur ini membantu menjaga desain tetap aman dan hanya dapat diakses selama durasi yang ditentukan.
1. Buka backend Enterprise, pilih 【Proyek】-【Semua proyek】, lalu pilih proyek yang ingin dikonfigurasi.
2. Klik 【Edit】 untuk masuk ke mode pengeditan. Di dalam 【Editor】, klik 【Sharing】 untuk mengakses pengaturan.
3. Setelah memilih 【Tetapkan Waktu Kedaluwarsa】, Anda dapat langsung memilih waktu kedaluwarsa yang diinginkan di kalender. Jika Anda menghapus centang pada "Tetapkan Masa Berlaku", akses ke gambar panorama tidak akan dibatasi oleh pengaturan kedaluwarsa.
4. Setelah masa berlaku diatur, poster panorama dan Kode QR terkait hanya dapat diakses dalam periode yang ditentukan. Saat masa berlaku berakhir, halaman notifikasi kedaluwarsa akan ditampilkan ketika gambar diakses. Namun, Anda tetap dapat mengatur ulang masa berlaku panorama jika diperlukan.
Bidang kustom untuk informasi produk akan didukung dan dapat diterapkan pada furnitur, tekstur, finishing, ubin tidak beraturan, serta katalog kustom perusahaan. Beberapa skenario penerapan dapat dipilih agar informasi produk lebih lengkap.
Langkah 1: Masuk ke Katalog Enterprise, lalu pilih 【Product Info】-【Info Manager】.
Langkah 2: Klik 【New】 untuk membuat bidang kustom, isi informasi dasar, lalu pilih 【Create】.
Garis Referensi berada di atas kanvas, dan objek dapat menempel ke garis tersebut. Fitur ini membantu desainer memosisikan atau menyelaraskan objek secara tepat selama proses desain.
Catatan:
*Fungsi Garis Referensi saat ini hanya tersedia di tampilan 2D, termasuk denah lantai 2D, tampak atas 2D, dan tampak elevasi 2D.
Cloud Design 5.0
Untuk mengakses fungsi "Garis Referensi": klik "Perangkat" di bilah atas → "Garis Referensi" (Anda juga dapat langsung mengaktifkan fungsi "Garis Referensi" dengan pintasan "T").
Setelah mengaktifkan fungsi "Garis Referensi", Anda dapat membuat garis dengan "Menggambar Dua Titik" dan "Menggambar Offset":
1. Menggambar Dua Titik
Gambar garis referensi dengan menentukan dua titik mana pun di kanvas untuk membuat garis yang memanjang tanpa batas.
2. Menggambar Offset
Aktifkan tepian mana pun di kanvas (termasuk garis referensi, segmen komponen denah lantai, atau tepian model), lalu gerakkan mouse untuk membuat offset dan menggambar garis referensi.
2.1 Offset konstruksi denah lantai
2.2 Offset garis referensi
2.3 Offset tepian model
Setelah garis referensi digambar, fungsi ini mendukung snapping pada model dan dapat digunakan dalam kondisi berikut:
1. Menyeret model & snapping
Di kanvas, saat Anda menempatkan model berdasarkan garis referensi yang sudah digambar, model dapat otomatis menempel ke garis referensi sehingga penempatan menjadi lebih efisien.
2. Snapping titik-ke-titik pada model
*Agar model mendukung snapping titik-ke-titik, Anda perlu mengaktifkan "Tata Letak Presisi" (lihat Tata Letak Presisi: Panduan Pergerakan Presisi).
Di kanvas, saat Anda menempatkan model berdasarkan garis referensi yang sudah digambar, Anda dapat melakukan snapping secara presisi ke garis referensi melalui titik awal dan titik akhir sehingga penempatan menjadi lebih efisien.
Setelah menggambar "Garis Referensi", ada dua cara untuk menghapusnya: hapus satu per satu dengan "Hapus" atau hapus semua dengan "Hapus":
1. "Hapus" satu per satu
Pilih garis referensi mana pun di kanvas, lalu klik "Hapus" pada menu objek untuk menghapus garis referensi tersebut.
2. "Hapus" semua
Klik "Hapus" di bilah atas → "Garis Referensi" untuk menghapus semua garis referensi di kanvas.
Tata Letak Presisi mendukung pergerakan objek secara presisi dari titik ke titik. Selama proses desain, fungsi ini membantu desainer memosisikan atau menempatkan objek secara akurat.
Kiat:
*Fungsi Tata Letak Presisi saat ini hanya tersedia dalam tampilan 2D (termasuk denah lantai 2D, tampilan atas 2D, dan tampilan elevasi 2D).
Untuk mengakses fungsi "Tata Letak Presisi": klik "Tata Letak Presisi" di bilah bawah → "Nyalakan/Matikan".
Setelah fungsi "Precise Layout" diaktifkan, objek dapat dipindahkan dan disejajarkan dengan metode "titik-ke-titik":
1. Aktifkan Precise Layout
Arahkan kursor ke "Precise Layout" pada bilah bawah untuk membuka panel kontrol. Klik "Turn On" untuk mengaktifkan Precise Layout.
2. Klik objek untuk mengaktifkannya
Setelah Precise Layout aktif, klik model di dalam kanvas untuk mengaktifkan objek target yang ingin Anda pindahkan.
*Pada tahap ini, 9 titik snap akan ditampilkan pada objek berdasarkan kotak pembatasnya. Titik tersebut mencakup titik tengah, titik pusat, dan titik ujung. Saat kursor diarahkan ke titik-titik ini, tooltip akan menampilkan informasi titik saat ini.
3. Pilih titik awal perpindahan
Setelah objek aktif, pilih titik awal pada objek dengan mouse.
3. Pilih titik akhir perpindahan
Setelah titik awal ditentukan, gerakkan mouse ke posisi mana pun, lalu klik untuk mengonfirmasi dan menyelesaikan penempatan objek.
Setelah "Precise Layout" diaktifkan, Anda dapat mengaktifkan atau menonaktifkan titik snap di panel untuk menentukan apakah mouse dapat menempel ke titik tersebut.
Seperti ditunjukkan pada gambar: Jika Anda menghapus centang "Center Point", "Midpoint", dan "Endpoint" di panel Precise Layout, mouse tidak akan dapat menempel ke "Center Point", "Midpoint", dan "Endpoint" objek di dalam kanvas.
Garis bantu dapat digambar melalui dua titik dan biasanya digunakan bersama objek. Garis ini membantu desainer membuat titik snap yang lebih berguna. Selama proses desain, garis bantu juga membantu desainer memosisikan atau menyejajarkan objek secara akurat.
*Fungsi Auxiliary Line saat ini hanya tersedia dalam tampilan 2D (termasuk denah lantai 2D, tampilan atas 2D, dan tampilan elevasi 2D).
Untuk mengakses fungsi "Auxiliary Line": Klik "Toolkit" pada bilah atas → "Auxiliary Line" (Anda juga dapat langsung mengaktifkan fungsi "Auxiliary Line" menggunakan pintasan "Alt+Ctrl+F").
*Fungsi Auxiliary Line hanya dapat diakses setelah Precise Layout diaktifkan (lihat panduan perpindahan presisi untuk fungsi "Precise Layout").
Setelah fungsi "Auxiliary Line" diaktifkan, Anda dapat membuat garis dengan metode "Two-Point Drawing":
1. Two-Point Drawing
Gambar garis bantu dengan menentukan dua titik mana pun di dalam kanvas.
Setelah garis bantu digambar, Anda dapat menggunakannya untuk kebutuhan berikut:
1. Mengikat objek dengan garis bantu
Di kanvas, pilih objek dan garis bantu yang sudah digambar, lalu klik tombol "Bind" pada menu objek untuk mengikatnya.
Setelah diikat, Anda dapat memilih objek dan menggerakkannya dengan mouse mengikuti garis bantu.
2. Membuat titik tengah
Di kanvas, gambar garis bantu berdasarkan dua objek untuk membuat titik tengah di antara keduanya.
Setelah garis bantu digambar, ada dua cara untuk menghapusnya: "Delete" satu per satu atau "Clear" untuk menghapus semua:
1. "Delete" satu per satu
Pilih salah satu garis bantu di kanvas, lalu klik "Delete" pada menu objek untuk menghapus garis bantu tersebut.
2. "Clear" semua
Klik "Clear" → "auxiliary line" pada bilah atas untuk menghapus semua garis bantu di kanvas.
Setelah garis bantu digambar, ada dua cara untuk menyembunyikannya: "Hide" satu per satu atau "Show/Hide" untuk semuanya:
1. "Hide" satu per satu
Pilih salah satu garis bantu di kanvas, lalu klik "Hide" pada menu objek untuk menyembunyikan garis bantu tersebut.
2. "Show/Hide" semua
Klik "Show/Hide" → "Auxiliary Line" pada bilah bawah untuk menampilkan atau menyembunyikan semua garis bantu di kanvas.
Fitur ini memungkinkan pengguna mengekspor informasi produk yang digunakan dalam hasil rendering, sehingga desainer dan staf penjualan dapat memperoleh data statistik yang lebih menyeluruh untuk mendukung proses desain.
Pengguna Enterprise
Langkah 1: Pilih proyek yang perlu diekspor informasi produknya, lalu klik 【View Project】
Langkah 2: Klik tombol 【Download】, lalu pilih 【Model List of Aerial View & Perspective View】 untuk mengekspor informasi produk
Pengguna Enterprise dan pengguna individual dapat mengunggah bahan konstruksi di Coohom, lalu menggunakannya di alat desain.
1. Jalur unggah: Perpustakaan Pribadi - Tekstur - Unggah Tekstur
2. Klik Saya - Unggahan
Desain konstruksi: Saya - Unggahan
Nilai proyeksi menunjukkan tinggi permukaan akhir plafon gantung dari plafon asli. Nilai elevasi menunjukkan tinggi
Apa masalahnya?
This will change the display language on this website.
We use cookies and similar tools to bring you a smooth and convenient experience on our site. To learn more about how we use cookies, view our Statement on Cookies here.
Along with User Agreement and Privacy Policy provided by Coohom Inc. and its affiliates (“we”, “us” or “Coohom Group”), this Notice provides you (or “user”) with information about the cookies that are used by the features and services of Coohom official website or Coohom Platform (“Coohom Platform”). This Notice will be reviewed from time to time to ensure that its content is kept up-to-date. If any changes are made, we will publish the latest version of the Notice here. When we make significant changes, we will notify you of the change the next time you visit Coohom Platform or by other means of communication.
When you visit Coohom Platform, the site asks your browser to store a small piece of data (text file) called a cookie on your device in order to evaluate the performance of the site. We also use third-party cookies, which are cookies from a domain different than the domain of Coohom Platform you are visiting, for marketing efforts.
We use the following categories of cookies:
Strictly necessary cookies are necessary for Coohom Platform to function and cannot be switched off in our systems. They are usually only set in response to actions made by you which amount to a request for services, such as setting your privacy preferences, logging in or filling in forms. You can set your browser to block or alert you about these cookies, but that will cause some parts of Coohom Platform to not work.
Performance cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site.They help us to know which pages are the most and least popular and see how visitors move around the site.If you do not allow these cookies we will not know when you have visited our site and will not be able to monitor its performance.
We also cooperate with third-parties that deploy cookies when users interact with marketing communications. Marketing cookies collect personal information such as your IP address and clicks. Collected information is used to evaluate the effectiveness of our marketing campaigns or to provide better targeting for marketing. We do not always have control over those cookies.
The "Cookie Settings" can be utilized to customize your cookie preferences. The "Cookie Settings" will record when you have consented to or rejected our Notice and will ask for consent once a year to ensure users stay up-to-date with changes to our Notice. All the performance cookies and marketing cookies are controlled by the "Cookie Settings". You can also access the “Cookie Settings” anytime from the link in the footer of Coohom Platform.
All of the cookies used on Coohom Platform, on third-party websites and through emails can be enabled or disabled through your browser. To control cookies through your browser, follow the instructions usually located within the “Help”, “Tools” or “Edit” menus in your browser. Please note that disabling a cookie or category of cookies does not delete the cookie from your browser unless manually completed through your browser function.
Your data collected from cookies can be deleted. If cookies are deleted, the information collected prior to the preference change may still be used. However, we will stop using the disabled cookie to collect any further information from your user experience. For marketing cookies, when a user opts out of tracking, a new cookie is placed to prevent users from being tracked.
You can set your browser to block strictly necessary cookies, but that will cause some parts of Coohom Platform to not work.
You can accept or refuse the use of performance cookies or marketing cookies at any time. If you choose to reject the use of performance cookies or marketing cookies, you will still be able to use Coohom Platform, and your use of all the features and areas of Coohom Platform will not be limited.
We may update this Notice from time to time or for other operational, legal or regulatory reasons to make changes in the cookies we use. Therefore, please re-read this Notice periodically to learn about our use of cookies and related technologies. The date at the top of this Notice indicates when it was last updated.
If you have any questions about our use of cookies, please feel free to contact us via email at support@coohom.com.
We will respond to your questions, comments or suggestions within 30 days after we receive them and verify your user identity.